Venison Jerky with an African Flavor

When I was hunting in Africa with my son Jason, we were fed delicious meat snacks called Biltong. It is dried meat that has marinated in special seasoning like our American Jerky.  Below is Impala from our hunt being skinned and prepared for both mounts and for our meals. Some of this meat finds its way to becoming Biltong, a prized South African snack food. Here we will use whitetail venison instead of Impala.

OLYMPUS DIGITAL CAMERA

It is akin to Jerky but Afrikaner’s would say that Jerky does not come close to the excellent flavor of Biltong. I expect that I will have venison in my freezer this year as I am hunting down south were the deer are very plentiful. So I want to try and make this Biltong recipe that I received from a friend that grew up in South Africa and now lives and works here. You may want to give it a try….

Ingredients:

5 lbs  game meat

venison steaks

red wine vinegar

coarse salt (I use Kosher salt)

whole coriander

black pepper

bicarbonate of soda

 

For this weight of beef or venison use:

 

2 tablespoons coarse salt

1/2 cup of coriander (if you have a mortar and pestle, you can crush them slightly)

1/2 teaspoon black pepper

1/4 cup brown sugar (I omit this, but I know some people add it)

1 teaspoon bicarb soda (I have made the biltong without this, however it does tend to keep the dried meat a little softer and easier to cut)

 

Mix the above ingredients thoroughly.

 

Cut the meat in strips (approx 1 – 1/2 inches thick), diagonally along the grain

place the cut meat in a large glass bowl

sprinkle with the vinegar to wet the meat

sprinkle your made up biltong mix over the meat

thoroughly turn the meat over with this mix, so that all the pieces are properly coated.

cover the dish with clingwrap and place in the refrigerator for approx 24 hours.

 

At the end of this time, discard any bloody fluid that has leaked out of the meat.

 

Make a 50/50 mix of the vinegar and water in a bowl.

 

Rinse the meat in this mixture quickly to get rid of the excess salt.

 

My friend uses paperclips that I have opened up to hang the meat. A washing stand placed on a shoe tray makes an excellent drying rack. Some folks make a cardboard drying box with a small fan and a 60 watt light bulb. Some hang the meat with string or thread using a large sewing needle. It will take roughly 4 to 6 days to dry hard on the outside and still be somewhat soft on the inside. More or less to your liking. I have a food dehydrator so I am going to use that.

I found a website that goes into great detail for larger quantities of Biltong

http://www.africhef.com/Biltong-Recipe.html 

Enjoy!

Penetration and Mushroom of Nosler 243 Solid Gilding Copper E- Tip after 8.5 inches of Fir

I am a believer in the copper bullet for hunting with high velocity cartridges such as the .243 Winchester with 90 grain E-Tips. The E is for Expanding!  It is as accurate as all get-out!.243 90g e tip entrance to wood

 

Mushroom at 20 yards 1/2 inch mushroom below.

243 e tip though fir logs 9 inches shot at 20 yards

Weight before: 90 grains

Weight after: 89.9 grains

Weight retention: 99.9%

For contrast there is a 100 grain Speer Hot core boat tail lead bullet with gilding copper jacket shot at left of the all copper e-tip.  The lead bullet exited the wood but was not recovered.

243 e tip center hole enter next 3 inches

A New Hampshire Deer Hunt Memory by Ed Hale

I am all alone but in reality I am really not alone at  all. I am with myself, hunting for deer with my trusty 58 Caliber muzzle loader, on opening day of the  New Hampshire Muzzle Loader deer season many years back perhaps in my mid 30’s. I hunted alone (with myself) often because I like hunting solo. Me, the woods, and the deer!

My soul senses a joy, like a kid opening his first Christmas present, as I ease into the pitch black forest. It is 4:30 AM, I can hear my breathing strong and clear through my nose. My mind momentarily conjures up a predator with teeth standing before me as I approach. A vestige of my childhood fear of the dark.  I forge ahead through that air space with narry a scratch.  Take that!  You toothless imagination. Be gone!  I chuckle to myself. DSC_0002

The fall oak leaves beneath my feet crunch with each step.  I slow down my pace. It is dark. The woods are still… Every step seems to shout as I attempt to become one with the forest rhythm. The air has the pungent smell of oak acorns and leaves, Douglas fir and dew soaked moss covered earth. A sweet but pungent oak flavor with a twist of fir and earth! Thank God for noses to smell, I think. It was so delicious that I could eat it if only it were edible.  Daylight arrives by each passing minute as I work my way toward where, just a week ago, I saw good deer sign of tracks, rubs and scrapes. Finally the leaves on the trees are visible with yellow and orange and deep red colors. The yellow comes from beech trees and orange and red from sugar maples.

As shafts of light arrive, the yellow leaves in front of me fall but just one at a time, a leaf falls hear and a leaf falls there. At my side is my knife, a “Buck” knife, with a Bowie style blade that is keenly sharp. The sheath and handle have been camo’d and are invisible against my camo clothes (I wore an orange camo vest and orange camo hat).  Around my neck is a buck grunt-call and a small pair of rattling antlers. As I approach the area I saw good deer sign. Shooting light finally arrived. The wind was nearly still.  I could not figure which way it was blowing, but I was as clean as I could possibly be with newly washed clothes. And I showered with scent free soap a dash of baking soda under my arms. Seeing a scrape on the ground,  I stood in an area that allowed my observation of two directions and began to grunt softly with the call sparingly…

Suddenly, a deer appeared as it hopped in front of me, a doe at 30 yards. My adrenaline kicked  in like starting ether to a gasoline starved lawnmower.  Heart hammering; I raised my muzzle loader and she was now facing me directly. In one movement she turned, hopped once and walked away occasionally looking at me over her back and I eased the  muzzle loader down. A buck with a rack is what I am after. She was a beautiful sight as she melted away. I took out the grunt call and tried to create a “tending grunt” call with several soft calls as if another buck was walking with her. Then tickled the tines of my small antlers. Minutes passed.

Woah! What was that to my right? An eight point buck was walking fast and straight at me at 25 yards. My heart was now fully soaked in adrenaline hammering as if to leave my chest. I swung the muzzle loader up and cocked the hammer. The shot angle was wrong but for this fighting mad buck to get to me, he had to walk around a thick sapling in his path. Never breaking stride he cleared that sapling at 20 yards and gave me a forward angled shoulder to shoot at. Ka Boom! I shot and the deer jumped left.  The belch of muzzle loader smoke hid the buck from sight. So I got on my knees and looked below the smoke. I was having no luck seeing the buck. Ok!  “Stay put”, I thought,  and mark the spot in my mind  where the deer was when I shot. Soon the smoke dissipated and I walked to the spot where I thought I shot. The nearest tree behind the buck was 4 feet away and covered in rich red blood at its base.

I reloaded, but knew that the buck could not have gotten far. Adrenaline was coursing through my veins. It was just an amazing feeling to be alive. The blood trail was enormous and 30 yards away lay the buck facing away from me. The exit wound was on the far side of the buck just forward of the rear ham. The bullet having skewered the buck from shoulder to its exit hole, about the size of a silver dollar.

I took the cap off the muzzle loader and reached for my deer tag. I gutted the deer, not having any rubber gloves, I proceeded to get messy up to my elbows. The bullet having pierced the gut left the acrid smell of the open gut wafted over me.  I began to get light headed. It was brief, but between the adrenaline and the acrid gut I turned and vomited momentarily. Wiping my face on my sleeve, I turned to the 8 point buck laying before me remembering he wanted a fight and said. Gotcha! Didn’t I !

I found a small branch and attached my drag rope to pull the buck out of the woods. I talked to my buck each time I got exhausted pulling and told him how fine a buck he was!  I would always remember this hunt. Today I share it with you! Memories are fantastic aren’t they! We can  relive them over and over! Good Hunting! © 2015

Deer Hunters Sight-in for Max Point Blank Range by Ed Hale

If your rifle is scoped with a single crosshair it is valuable to sight in your rifle at Max Point Blank Range (MPBR) for hunting so that all you need to think about is taking the shot, in most cases. MPBR is the maximum distance that your rifle bullet will fall three inches below the point of aim or rise above point of aim by three inches. By using the JMB ballistics program for Trajectory below you can calculate bullet drop and rise if you know bullet speed, the ballistic coefficient of your bullet. Set the target height at 6 inches and the vital zone radius at 3 inches in the spaces provided in the calculator. At the last part of the calculator check the box for Elevation correction for Zero Range and the box for Zero at Max Point Blank Range. Hit Calculate. The results will show the height of your bullet at its highest (three inches) and the MPBR distance where it is 3 inches low. The Savage 11/111 7mm Rem Mag with Nosler 140 grain E-Tips I am testing has a MPBR of 294 yards and the bullet reached its 3 inch max height at around 140 yards.

http://www.jbmballistics.com/cgi-bin/jbmtraj-5.1.cgi

Typically at 100 yards the bullet will hit the target at 2.5 inches high or so and peak at around 140 to 150 yards for a fast spitzer bullet traveling above 2800 fps.

At 25 yards your bullet will hit the bullseye. At 50 yards it will hit an inch high so if your shooting in the thick stuff your bullet will be right on target and the deer will never know what hit ’em. Or if you have to shoot farther you are good to go by staying in the Vital area.

Give it a try!

Good Hunting!

Ed’s Deer Hunt tips during the Rut- CWD Update for 2016

It is when we do what we are supposed to, out of good habits, that success comes our way. But we don’t always practice what we preach, me included. So we redouble our efforts and they can pay off. Sometimes!

Deer’s Primary Detector is Smell! 

So watch your wind carefully.So watch your wind carefully. Yes I said that twice. Or be above it. You can never be too scent free. Deer do not need to see or hear you to get out there. Smell is all it takes. Clothing and you favorite smell ridden hat does most of the betrayal. Keep your clothes scent free and in a plastic bag with scent killer or pine/fir needles

Keep getting detected by squirrels? They chatter a warning!

My guess is that you are not wearing face camo or a face mask. Get a face mask pronto because deer aren’t stupid and depend on other animals to sound the alarm. For years, I never figured that one out. With a camo mask I have squirrels feeding within feet of me.

What if you get on your deer stand and it is very windy?

This is not a good time to see deer while on stand as they often hunker down in very windy deer woods. At some point high wind may drive them to be in fields or small clear-cuts so they can see with their eyes too. Stay mobile and I believe still hunt (slow movement watch steps)  is the best option into the wind. During the rut, by walking in the wind, you can sometimes smell a deer and its tarsal glands. Keep gun at ready. Never take safety off unless game is in view and it is safe to shoot. For Safety; Discuss options with hunting partners in advance.

What if wind is blowing where you want to still hunt? Change your position to hunt into the wind. Or get above the wind in a tree stand. 

Wind is swirling during your hunt? This means that wind can give away your position. But use it to your advantage by staying clean, wear scent killer, while on stand place estrous scent (only if during rut) nearby to overcome your smell. (Never on your clothes)

Note: 2016 – NH Fish and Game no longer want you to use urine based scent as they believe Chronic Wasting Disease elements called prions can be present from unregulated deer farms. Look for Synthetic non-urine based scents while this CWD issue is of concern.

I drew a big buck toward me by being clean and placing doe in estrous and mature buck scent 20 yards apart with me in the middle. The buck was bedded 150 yards away in a thicket. All that buck knew was that there was a rutting buck with an estrous doe in that bedded bucks bedroom. He was madder than heck that another buck was in his turf and came to investigate. I shot him at 40 yards in his bedroom.

Let scents do some work for you during the rut.

While you do your best to minimize your own scent, place estrous scent in the wind column where you want bedded bucks to smell it. Place your ground stand laterally 90 degrees 50 to 100 yards away if hunting on ground.

Bowhunting? Use a spray bottle after you are in your tree stand. At 4 mph the wind will blow 1 mile in 15 minutes, a half mile in 7.5 minutes etc. Trust me, the bedded bucks that are 200 yards away will smell that spray scent in 1 minute and use its ears to hear any activity. Follow up with a soft grunt call to peak his curiosity. Don’t overdue the grunt call. Less is more.

During the Rut. If you are overlooking a field where deer are feeding, let the deer themselves pull bucks from cover. Don’t betray your location unless a buck you are interested in shooting is walking away. If so, a single grunt can turn a buck back towards you. Grunt calls work. It is best to have a soft callng grunt device and a louder device.

Best for last:

Grunt, rattle and beat the heck out of trees to call in aggressive bucks. Check on line for videos for techniques. I killed a nice 8 point with that technique and a 800 pound bull moose.  And watch that wind!

moose down ed oliver

Good Hunting!

 

 

 

 

VX-6 Boone and Crockett Reticle – Leupold Ballistics Aiming System on Savage 11/111 Long Range Hunter

Experimentation with the Boone and Crockett™ Big Game Reticle is best when a long-range place to shoot out to 400 to 600 yards is available. I did not have that, but went through the exercise with some known information. But I still need a long distance range to proof the work.

a zero to 600 ad

 

The key to properly using this reticle is to have a laser rangefinder.

Accurate distances mean accurate trajectory once your bullet has been sent downrange at those longer distances. First the VX-6 comes with triangle markings on the zoom ring for some bullet speed groups called Group A and Group B and C cartridges. A large white triangle on the Power Dial is near 18x is designated for bullets muzzle velocities 3000 fps and a small triangle mark on the power dial for slower bullets. Group C cartridges are for very fast bullets 3100 fps to 3400 fps like 7mm RUM and .270 Wby and are sighted in at 300 yard zero verses 200 for A and B groups but use the larger triangle on the power dial at 18x.

The Savage 11/111 Long Range Hunter in 7mm Rem Mag I am testing with the VX-6 and Nosler 140grain E-Tip is in “Category A”  thus it required the shooter to zero the rifle at 200 yards shown above. My range limitation was 150 yards so to estimate the 200 yard zero i used JBM on-line software. I knew the speed of the bullet as I chronographed it already at 2950 fps and are sub-moa accurate.

My 7mm Rem Mag when zeroed at 200 yards is 2 inches high at 150 yards. With this setting and not changing point of aim I am at Max Point Blank range to 270 yards and will stay within a 3 inch radius. At this point the bullet is falling fast and to kill game at 300 yards needs to use the next cross-bar below. At 150 yards as point of aim using the 300 range cross-bar places the bullet nearly 5 inches high and will strike the target 6 inch kill area at 300 yards based on the JBM data of bullet drop at 300 yards. Proof is actually shooting at 300 yards to confirm the bullet placement.

The next bar below is supposed to be the 400 yard bar but because my bullets drag and speed is slowing, it strikes the target at only 335 yards for a kill shot based on drop data from JBM. This bullet at this point is “falling like a rock” due to the effects of gravity squared and accelerating the bullet drop. Accordingly, distance accuracy with a laser rangefinder is an absolute must.

Max Point Blank Range (MPBR) Zero 

The method of Calculating Max Point Blank range all by itself takes the Boone and Crockett reticle out of use as the rifle needs to be zeroed at its maximum zero range of 250 yards with the main cross hair based on the 2950fps and BC of the Nosler 140 grain E-Tip. With this method the rifle has a MPBR of 294 yards. For most of us wanting to shoot long range that is all we need as long as a steady rest is available.

If I was shooting prone position at a test range that was in the 400 yard to 600 yard category the B&C reticle would offer proved solutions to where the lower long distance crosshairs of 400 and 500 yards will fall.

Wind Drift

The two largest factors in long-range accuracy, given that you have a steady rest, is bullet drop and wind drift. The most unpredictable is “wind drift” of your bullet. At a MPBR of 294 yards with a 10mph wind will move your bullet 5 to 6 inches left or right from center per JBM data. A 5 mph wind will push the bullet laterally 2.9 inches in keeping with the 3 inch radius you are trying to keep to. The good news is that wind in the early dawn and dusk where you expect to see game is often negligible.

Hunter Ethics

Having gone through the exercise, the bottom line is hunter ethics. If you have not shot or practiced or proved your crosshair use of B&C at these longer ranges then you should pass on the shot. As I said in an earlier article, that buck may be within your range another day. Patience is a virtue a good hunter learns. We all want a clean kill and a promise to yourself to abide by that is important.

Hunt Where The Deer Are!

If you want to maximize your chances of seeing deer during deer season, then hunt where the deer are. Below is the QDMA Deer map at both the national level, state level and by county to see deer density. In New Hampshire, state wide there are less than 15 deer per square mile in most parts of the state according to the QDMA map below. The further north you go there is even less per square mile. The coast of NH is where the deer density is highest along with hard to hunt heavily posted land.

http://www.i-maps.com/Qdma/frame/default1024_ie.asp?C=48449&LinkID=0&NID=0&cmd=map&TL=100000&GL=010100&MF=11000

Deer hunters bring dollars to many far reaching towns. As the deer population is strictly managed at very low levels in some states, hunters find other places where game is more abundant and managed equally for hunting opportunities. QDMA (Quality Deer Management Association) is an organization that brings deer science to the forefront. I am not a member at this time but will consider a future opportunity.

NH Fish and Game provide a Hunter Harvest Summary that tells of where the deer are by past harvest records.  http://www.wildlife.state.nh.us/hunting/documents/2014-harvest-summary.pdf

 

 

Tree Stand Shadow Man

It is August and a great time to place your tree stands for hunting.  I was doing some research and found that this QDMA hunter placed a human silhouette in his stands by cutting it out of a 4×8 T111 panel. It helped in both hiding himself from a rear approach and got the deer to accept the camo form later to be replaced by the hunter. More, that he piles brush in the rear of his stand so that deer must cross in the visible range.

https://www.qdma.com/articles/deer-stand-tip-let-shadow-man-hunt-your-stand

 

 

On the .375 Ruger Guide Gun a Reader Writes…

On the .375 a Reader Writes…I have recently acquired a .375 Ruger GG,Guide Gun and was wondering if you’d be kind enough to share load data? I’ve read your reviews on this cartridge and some of the loads mentioned. I would greatly appreciate your assistance in getting started, especially with reduced power practice loads.

Kind regards,

Joe

Ed wrote back:

Congratulations! You have the rifle that can take the Planet’s game, if you reload, from rabbits to elephant. I can honestly shoot full power loads Nosler or Hornady 260 or 300 grain loads in my t-shirt when standing or using African shooting sticks and I am an older man. The gun pushes more that it kicks. Using the best recoil pad helps to reduce felt recoil up to 50 to 70%. Reduced Load data is hard to find or in fact for some loads non-existent. Are you familiar with .375 H & H Magnum “reduced load” data by Hornady? If so, that data may be helpful like it was for me. Unfortunately, I cannot share exactly what worked in one rifle that may not work in another one. The heartening part I found was that taken in baby steps, I never had a problem in working up a load and you shouldn’t either. I killed a red deer doe at 190 pounds on the hoof at 50 yards with the 225 flat nose with a starting load. She went 20 feet and piled up with a hole in her heart the size of my thumb and it exited the doe. There was so little recoil and the report was without the mighty crack of the rifle that my guide 200 yards away never heard the gun go off. It was like I was shooting my muzzle loader.

Mid-power loads are already published. Look into the Speer 235 grain Hot Core as a mid load and extrapolate starting loads, if you are so skilled.

It is when I am at the bench hunched over the rifle and locked in so-to-speak that can hurt, so I use a Simms Limbsaver® shoulder pad and a Pachmayr Decelerator® recoil pad to make the felt recoil so tame. You have found a great rifle and cartridge. Wow is it accurate! Enjoy! Good Luck! You will be just fine if you are a veteran reloader.

Good Hunting!

 

 

Hunting Ammo and Bullet Fragmentation by Ed Hale

I provide this thought provoking article for your education and mine on choosing your hunting bullet.  Outdoor Life, in the article below, has more on the lead in rifle bullets used to kill deer and other big game for food. Man has been killing and consuming wild game shot with lead for hundreds of years. We  are still here, but can we do better?

http://www.outdoorlife.com/articles/hunting/whitetail-deer/accessories-gear/2008/12/update-lead-your-meat 

Also, below is a Power Point Presentation on the Minnesota Study regarding lead fragmentation. Lead fragments have been found as far away as 18 inches from the wound with some high speed bullet types. Most slow muzzle loader or shotgun show no lead particles.The DNR report has x-ray images that you can see with your own eyes.

http://files.dnr.state.mn.us/fish_wildlife/lead/index.htm

Prevention is worth a pound of cure. If you don’t want lead in your game meat you can shoot rifle bullets without lead in them. This is a 100% guarantee of “no lead” Or shoot a shotgun slug or muzzle loader that is slow enough not to fragment.

Or

Shoot bullets whose lead is bonded to the jacket and is proven to retain most of its weight. Bonded bullets are new on the hunting scene in the past decade and add to the value of a controlled expansion bullet that often provides an exit wound and a blood trail.

The  Nosler’s E-Tip : E in E- Tip® is for Expansion and retains virtually 100% of its copper weight, curles into a perfect mushroom, and leaves no copper in your barrel or the game you hunt.

On the Nosler AccuBond; I have killed game with the Nosler AccuBond® and find that it is true to its name and holds a high weight retention.

I hear good reports for high weight retention for Barnes Bullets made of soft copper and mushroom well but find that they leave copper in some of my rifle barrels not a big detractor just scrub your barrel well and more often.

The Hornady InterBond® bullet is a bonded lead core to the copper jacket and has high weight retention as does the Swift Scirocco® a bonded bullet that uses pure copper for the jacket and not gilding copper. Pricing of bullets for hunting are a little more for bonded and copper but they are worth it! Here is a chart of cost per shot using a .270 Winchester as an example. Note: Winchester makes a copper bullet not included here, maybe another article. 

Screenshot (159)

It looks like copper is slightly more per shot but data shows that they retain the most weight of the two types bonded vs copper and fully mushrooms or petals. Both bonded and copper stay together often leaving an exit wound for a blood trail. But only copper leaves no lead fragments in your meat! Choose you Bullets…WISELY!