Nashua High Power Match Score Cards July 9th at Nashua F & G with new .308 Criterion Barrel

Nashua High Power Match Score Cards July 9th at Nashua F & G with new .308 Criterion Barrel was tested in Jason Hale’s previous article.

Jason article Pic 1

Below is Jason’s first 3×600 Prone shoot score cards. 20 shots for each  of the 3×600 matches that day. Each line represents 10 shots for score, Max score for each shot is 10 points with the X being the very center of the bullseye. In the first card you see s1 and s2 and are non scoring practice shots. The 95 means 95 out of 100 as a possible score and the 3 represents the number of X’s. Now you can read the rest of the score cards. His rear rest was a squeeze bag in this case and made it more difficult. Not bad for his first 3×600 shoot. We are awaiting how he placed in the shoot.

IMG_1011

 

Savage Upgrade and Barrel Swap for NRA Long Range Target by Jason Hale

jason

After some nagging from my dad and carving some time out away from work and family, I finally got around to writing this article…..

I’ve long since been bitten by the long range target and hunting bug and now own 2 savage 10/110 FCP rifles chambered in .308 Winchester and .300 Winchester Magnum cartridges.  Upon seeing the accuracy potential of the .308 at the Sig Sauer Academy “Reach for a thousand”  1000 yd course a while back, with bone stock, I decided to purchase some upgrades to convert it to a long range rig.

The initial upgrade was the JP rifles AMCS chassis system, and then mounted some new glass (Vortex Viper 6-24x FFP).  See photo below by author.

Jason article Pic 1

With the added weight it was not suitable for hunting, but if I wanted to lug it around the woods, I could always return it to the OEM HS Precision stock and head out into the woods.

 

Since the stock upgrade, I’ve been looking out for any precision rifle series matches in the northeast, and haven’t found one yet, so I’ve taken to NRA F class target shooting.  Following the stock upgrade I entered into my first F-TR match and didn’t do half bad.  So after that, I committed to myself to enter into every match I could.  I set out to research a bit more about barrel upgrades I could do to make it more suitable for F-TR.  I was drawn to the inherent versatility of the savage barrel nut system, and dreamed about match grade barrels, but never had the courage to pick up a new one until I skimmed through a favorite website (Northland Shooters Supplies (NSS) website: http://northlandshooterssupply.com/).  I looked over their offerings with respect to target barrels and gave them a call, 15 minutes later I purchased my first 28″ button rifled match grade barrel made by Criterion Barrels . http://www.criterionbarrels.com  Five days of ground shipping later, I had that handsome barrel in my itchy hands.  While I was waiting for its arrival, I decided to clean the original barrel, oil it and prepare for it’s removal.  I purchased all of the re-barreling tools some time ago anticipating this activity happening at some point.

 

Jason Article Pic 2

 

  1. Savage action wrench from NSS
  2. Savage barrel nut wrench from NSS
  3. Savage stainless barrel nut and recoil lug.
  4. Chamber GO/NO GO gauges from Pacific Tool and Gauge. (absolute must for setting headspace properly)
  5. 1/2″ Torque wrench (make sure you calculate torque correctly accounting for extensions from the torque wrench head that increase lever length.)
  6. Never-seize (not seen in picture)

With this kit, I can re-barrel my action with barrels chambered for  .243 Win, 308 Win, .358 Win, .260 Rem, 7mm-08, and the .338 Federal cartridges.  Not bad for versatility, I’d say!

After installing my action into the action wrench and putting the wrench into the vise, I slid on the barrel nut wrench and with deep breath and a breaker bar easily loosened the barrel nut.  I was surprised at the ease of barrel removal reading of all of the horror stories from the web forums.

Jason article Pic 3

The critical part of re-barreling is setting the headspace correctly.  As I learned while reading about this swap, and thankfully not by experience, it is imperative that you remove the ejector plunger before you insert the headspace gauge, unless you fancy large gouges in your pretty chamber; not me.  Step by step instructions recommending the same can be found throughout the net as well as the fine folks at NSS.  One point to note, you don’t want the barrel to rotate as you torque the barrel nut and jam the go gauge in the chamber, you may end up with something slightly shorter than SAAMI Sporting Arms and Ammunition Manufacturers’ Institute specification, or at least a chamber that may not accept previously made loaded rounds due to headspace differences.  I had a rubber strap wrench hanging around and put it to good use to counter the twisting of the barrel.  One last torque and the rifle was re-assembled into the stock.

Overall the process was painless as well as exciting as long as you take it slow.  I took three shots below following zero and some break-in combined with some load work-ups.  Below is the 3 shot group of my current load.

Jason article Pic 4

The point of this article on swapping barrels on a Savage with a threaded barrel is that you don’t necessarily need a gunsmith to swap a barrel on Savage rifles. That makes Savage actions and rifles a versatile indeed!

Editor’s Note: This tight 0.28 inch 3 shot group that Jason shot is the result of experimentation with many variables such as the new barrel,  bullet, powder, cartridge case prep, primer, overall length and many other details. In addition we compute standard deviation and extreme spread to maximize long range potential.

© 2016 Jason Hale  for New Hampshire Rifleman Magazine

Prep for 1000 yards at Sig Sauer Academy with Savage M12 Long Range Precision Rifle in 6.5 Creedmoor by Ed Hale

I am looking forward to the Reach for 1000 training at the Sig Sauer Academy this July 19th with my son Jason who has already taken the class but desired to attend with me as a father/son event. I have already competed at Nahsua’s  300, 500 and 600 match with my AR-15 and 77 grain Nosler Bullets and calculated bullet drop tables after measuring bullet speed with a chronograph. Now with the 6.5 Creedmoor we have lots of bullet weight for the caliber, store bought Hornady 143 grain Extremely Low Drag Hunting Bullets (see the article inside). They are not tack drivers but sub-moa never the less in my rifle so I should be able to easily reach the 1000 yard mark… and a lot more if it was available.  The velocity spread is wider as I measured with my Chronograph so I expect some vertical stringing at 800 and 1000 yards They do not allow hand loaded ammo. I will report back after the course.

I am taking the course because professionals are teaching it and want to see what new things I can learn from the Pro’s.  Cost $300 + 150 rounds of store bought ammunition. We shall see if the cost of training was worth it?

The training includes:

  • Zeroing and Grouping at various distances.
  • Precision Shooting drills
  • Improvised shooting positions
  • Field shooting 100,300,500,800 and 1000 yards.
  • Preventative Maintenance, inspection and safe storage.

Required Equipment

  • Hard Cased – Precision scoped rifle w/sling – I am bringing the test Savage Model 12 Long Range Precision Rifle with a test Leupold 20 MOA picatinny rail and test Leupold VX-3i 6.5-20x50mm scope with fine duplex crosshairs
  • Spotting Scope – A Leupold Sequoia 15x – 45x
  • Rangefinder – Leupold test RX-1200i TBR/W Good for the activity? We shall see?
  • Rifle cleaning equipment – bringing 2 full length cleaning rods w brushes and brass jag tips, Butches bore shine, and cleaning pads.
  • Field Note Book and Pencils
  • Clothing suitable for training in any weather. With Poncho if necessary
  • Hydration System – Test with 3 liter Camelpak Thermopak back pack from e-bay
  • Sunscreen and Bug Spray
  • Hat with brim
  • Wraparound eyewear, polycarbonate lens or no shatter prescription.
  • 150 round estimate of ammo.

Initial Tests Hornady ELD-X Precision Hunter Ammo 6.5 Creedmoor-Update 7/4/16

See  below for update.

This Precision Hunter™ ammo from Hornady features “the 143 grain  ELD-X™ bullet and carefully selected propellant and primer to deliver match accurate hunting ammunition.”  Every gun is a bit different in how this ammo shoots. Below I tested it for bullet speed. It is advertized to shoot 2700 fps at the muzzle but does not state barrel length. I assume a 24 inch barrel but I am shooting a 26 inch barrel and as advertised it was 2700 fps plus my two extra inches of barrel making it around 2738 fps give or take. Nice!image of Savage m12 lrp with leupold vx3i looking down range

I left the zero as it was from shooting Sierra 142 grain HPBT target bullet traveling an average speed of 2706 fps. Below are Groups 1 thru 4. Cold barrel shots are very different 1.3 inch group and high. I made no changes and shot groups 2,3, and 4. G 2 was 0.73″, G3 was 0.53″ and G4 was 1.45 inches.

Population Standard Deviation, σ 9.66
Variance (Population Standard), σ2 93.44
R range=28

Mean (Average): 2738.6

This is good for hunting but I need to try these again in a separate experiment. At 100 yards these should all be within an inch. Need to test again in a clean rifle and may be the rifle. . Group G1 was shot out of a cold barrel as in hunting. Only G2 and G3 are sub-MOA. All will mushroom and kill game from close to far as slow as 1800 fps up to 2660 fps.

hornady ammo Precision Hunter target

G4 shot should have all been together as in G2 and G3. More experiments planned soon to see what the problem is.

UPDATE

Cleaned a scrubbed the barrel July 4th and took to range. All shots are sub-moa varying from 0.97 inches to 0.25. This factory ammo is excellent for hunting out to 600 or so yards.

© 2016

 

The NEW Leupold VX-3i 6.5-20X50mm CDS Target Scope

The NEW Leupold VX®-3i 6.5-20X50mm CDS Target Scope from Leupold and Stevens is an improved version of the VX-3 where I verified that the power dial is much easier to turn, especially with gloved hands in the field. https://www.leupold.com/hunting-shooting/scopes/vx-3i-riflescopes/vx-3i-6-5-20x50mm-30mm-side-focus-cds-target 

With a 30mm tube it draws light in like a magnet from the 50mm Objective Lens and its Twilight Max Light Management provides maximum brightness in all colors and intensifies contrast on the range and in the field. The tall turrets are designed for ease of use and visibility to change windage and elevation setting on the go. The scope does not come cheap, its MSRP is $1169.99 but I have seen it for just under $900 on-Line. You get what you pay for. This scope is capable for long range hunting and varmint and comes with its famous dual erector springs so it can take a beating with a big bore rifle. Setting the Zero on the turret is easy to do with the provided Allen wrench. This wrench is very small indeed so keep it in a safe place. Each turret has three Allen screws to loosen to free the dial so it can be turned to Zero as seen in the photo below. I have dialed in a 600 yard solution and turned the elevation dial and fired Hitting just out of the bullseye on the first shot. The adjustments are crisp with a felt and heard (audible) click and right on.

vx3i elevation and wind adjustment

In the image above you can see the elevation turret with the Allen wrench sticking out and the side focus on the left with hash marks. The Side focus really aids it creating a sharp image. At 600 yards the F Class target X ring as seen through the scope is as clear as day so you can count the points on an Elk just as easy from that range. Leupold scopes are really rugged and can take the abuse of hard hunting.

 

From the website above Leupold states: “America’s favorite riflescope just got better. VX-3i brings legendary Leupold Gold Ring performance to a new level. Twilight Max Light Management System provides maximum brightness in all colors and intensified contrast across the entire field of view. Dual Spring Precision Target Adjustments perform with match grade precision and when paired with the Custom Dial System (CDS) long range shooting solutions have never been easier. The 30mm maintube dramatically increases windage and elevation travel while the side focus adjustment makes fine-tuning parallax effortless. The easy turn power selector can be quickly turned, even with gloves on while watertight seals ensure fog free performance for a lifetime.”

“Versatile magnification ranges and an attractive new look make the Leupold VX-3i riflescopes ideal for virtually any hunting situation. The aggressively redesigned power selector is easy to grasp and turn and allows the shooter to quickly verify the power setting even with gloved hands.

The Twilight Max Light Management System delivers the highest average light transmission in all colors with emphasis on the blue and red portions of the light spectrum for exceptional low light performance and contrast in all conditions.

Edge blackened lenses reduce diffusion and glare to improve resolution and contrast. Second generation Argon/Krypton gas more effectively resists thermal shock and the dual spring precision adjustment system ensures match grade repeatability and strength.

Top it all off with DiamondCoat 2™ external lens coatings for scratch resistance and you can see why the VX-3i is the first, last, and only name in riflescopes. As always, each Leupold Gold Ring riflescope is factory tested to be the ultimate in ruggedness, reliability and absolute waterproof integrity. Covered by the Leupold Full Lifetime Guarantee.”

6.5 Creedmoor – Savage M12 LRP Rifle/w Sierra Bullets and H4350 Powder (Continued 6/21/16 and 6/22 update)

There are many fine articles on the web that discuss this load combination but every rifle is different so loads with powder and bullets need to be worked up carefully and safely. This is a continuation of a series of articles here on this site highlighting the rifle, a Savage Model 12 Long Range Precision Rifle with the Leupold VX-3i 6.5-20 X 50mm. Both are a marriage made in heaven and work seamlessly together. See the image on the front page. In addition to this great marriage of rifle and scope we add Sierra 142 grain HPBT Match bullets lit by H4350 Powder seen in a recent article here.

Earlier articles used newer cases that were full length resized. Below I used cases that were twice used and neck sized. An advantage of using cartridge cases previously used in the same rifle is that they now fit the chamber perfectly and have a positive effect on group to a degree that is often noticeable. Since I am relatively new to the rifle some accuracy comes from the shooters comfort with the rifle, scope and loadings. That would be me!  I reloaded the H4350 with slightly hotter loads for the Sierra 142 grain HPBT observing for signs of high pressure adding a tenth of a grain at a time at near max loads.

Weather sunny with 12 oclock  0 to 5 mph wind. Ideal!

Shooter – Ed Hale

Group 1 was a three shot group that I previously tested in an earlier article with the best being 0.235 inches. This group was 0.3 inches. No data measured.

Group 2 is a 5 shot group with a flyer using 40.5 grains powder. With the flyer it shot 0.7 inches. If take out the flyer it is 0.36 inches.

Velocities; 2653,2630,2641,2633,2638

Mean (Average):2639

Range 23 fps

 

Population Standard Deviation, σ=7.9

This is a very tight spread.

Group 3 is a 5 shot group with 40.6 grains of H4350 measuring 0.34 inch spread.

Velocities 2661,2656,2648,2624,2633

Population Standard Deviation, σ=13.922643427166

Range is 37.

Mean (Average):2644.4

Best group with widest velocity range if the chronograph is correct. Best to repeat this test to be sure of the Range calculation.

Group 4 is a 5 shot group with 40.7 grains of H4350 measuring 0.69 inch spread and still no case or primer issues.

Velocities 2636,2655,2650,2636,2645

Population Standard Deviation, σ 7.5524830353997

Mean (Average): 2644.4

Range 19

The Target tells some of the story.

Savage M 12 LRP 6.5 Creedmoor June 21, 2016 Chester NH

Low Range and Std Dev σ is best.

I have added today 6/22/16 image

Tested H4350 at 41.1 grains Group 1 and G2 at 41.2 grains powder trying to achieve a speed of 2700 fps and I did.

UPDATE BELOW FOR 6/22/16

Group 1 on 6/22/16 41.1 grains was a cold barrel and the first shot pulled right 1/2 inch. the other 4 shots grouped less than 1/2 inch statisticical variation of range “R”  in group 1 was 46 fps thus would exceed 3 sigma in standard deviations from the mean and will group poorly at long range.

2706,2693,2696,2659 One data point was not captured so i used the 4.

Population Standard Deviation, σ 17.69

Range R = 45

Mean (Average): 2688.5

Very poor long range reliability as the range and standard deviation conclude poor confidence.

Group 2 on 6/22/16 is 41.2 grains H4350 and measured 0.49 inches of 5 shots.

Chronograph of each shot 2687,2691,2708,2702,2687 in fps. Use an online Std Deviation calculator.

Population Standard Deviation, σ 8.5
Mean (Average): 2695

Range R=21 fps

This is excellent! Speed is there and the Standard Deviation is below 10 and with a range or spread of 21 fps the rifle should shoot very well at long distances with this load. A real winner and for all intent it is a 2700 fps load that can win at 600 yards in F class competition.  I would like more speed but this will work.

june 22 group w 41.2 g h4350

Note there are barrel harmonic vibrations at play and each barrel is different. By testing in this way you are trying to shoot in the valley of the rifles harmonic vibrations. I did note that the barrel performed more consistent when it was warmed with a few shots first.

The quality and clarity of the Leupold VX-3i 6.5 -20 x50mm makes a huge difference for me the shooter. The image was so crisp that I could hold within 1/8th inch of crosshairs or less and is specifically designed for long range. At 100 yards I shot it at 14X. This scope has a side focus to reduce parallax. More on this scope soon!

© 2016

 

 

Savage Model 12 Long Range Precision Rifle at Nashua 600 yards by Ed Hale

For those just joining us today to read about the Savage Model 12 LRP Bolt Action Rifle, take a moment and look back at recent articles introducing the Savage Model 12 and the Leupold VX-3i Scope I am testing. This will aid in a full picture of the testing we are doing. This is a competitive target rifle that can shoot 600 to 1000 yards in a NRA competitive shoot… and win.

It was the first time that I took the Savage Model 12 Long Range Precision Rifle to the Nashua 600 yard range just a few days ago. It was with all the seriousness of a Competitive shooter that I came to shoot at Thursday practice.

savage m12lrp with ed hale at 600 yards

 

Planning included significant research into the Rifle itself, the scope used, the bullet,powder, seating die and Cartridge Overall Length. Read earlier articles.

The day was very breezy with a shifting 11 to 12 o’clock wind that peaked at 20 mph and averaged around 10 mph. Yes some would say that was easy with wind blowing at me, the wind was blowing “mostly” at me but on occasion swirled right to left unpredictably. Temperature was about 60 degrees and humidity low. I was on time to shoot but was partnered with someone who was not shooting F class and was shooting first. That meant I was headed to the shooting pits to pull targets for him first and I got to shoot later. The target above represents 2 shooters, I have studied the target before I shot and confident of my shot groups. What appears evident is that shooting close to a bullseye is not a 10, it is a 9. I shot lots of 9’s with some in the 10 and one or 2 in the X ring. At 100 yard this rifle is sub-MOA all day long, so to have a 10 inch spread seems way off until you include wind. Matter of fact it was a very tight group but needed more skill to click left a 1/4 (1.5 inches) and maybe down 1/4 Minute to center over the 10 ring. Burning powder at the range will help that. What was so satisfying is the work I did with my rear sand bag height. It was as perfect as I could want. The crosshairs could be adjusted with a little rear pressure to hold steady on the X ring. Each shot was comfortable to shoot with light recoil due to the 12 pounds of the rifle and scope. I calculated a 15 minute correction from 100 yards to shoot 600 yards with my JBM Software. My first shot was a 9. Nice! I was very impressed with the Leupold VX3i 6.5×20 50mm scope. It is an improved version with an easily turned power dial. As I was in the Pit first I got to see what other shooters were doing. Honestly I did extremely well but there were a few hot shot shooters that I did not see shoot. Those folks are my real competition and my own best self. I was pleased with my partner and his speed of marking and putting up my target. I was done first of 12 shooters.

So at 100 yards I grouped sub MOA less than 1 inch at 100 yards. My best 3 shot group is less than 0.25 inches but my 600 yard range leader says I need more speed than 2600 fps to buck the wind so I may give some MOA accuracy to get some speed to the target. That is a work in progress. As you can see below the Savage is a BIG barreled Rifle and without the scope it is a hefty 11 pounds. Three pounds or more than a big game rifle. Its primary task is Competitive Shooting at long range such as F Class. The rifle can be used when hunting from a stand or blind with a monopod, bipod or tripod but there are better lighter rifles for that. See the Savage article on the Model 11/111 I took to North Carolina for deer hunting.

DSC_0001 - Copy

Lower right is sight in 3 rounds to get on an orange square. Upper left is group 1, lower left is group 2.  I realized at that moment that my cheek weld could be better and perhaps part of the problem. Then I shot three rounds for group number three at 0.235 inches. So the take away was that a good cheek weld with this scope was vital and it paid off.

IMG_0956

Hunting rifles are not designed to shoot 20 rounds in 15 minutes and keep the barrel cool and on target for long range accuracy, they are designed to kill game in the first few shots. So if you have a hankering for competition like i do then it is a great rifle. I have two more competitions this summer with this rifle so we shall see what I can do. The competitive path will surely make me a better long range shot while hunting. More to come…

Good Shooting!

© 2016

First shots Savage Model 12 LRP in 6.5 Creedmoor by Ed Hale

sav m12 lrp 1

IMG_0944

My first shots with Savage Model 12 today. My best group 1/2 inch at 100 yds out of the box. Of course we will shoot even better as I get accustomed to the rifle. Today I used my Leupold VX-6 at 10 power. Bullets were Sierra 142 g HPBT with 40.7 g  H4350 powder and CCI BR-2 primers. Wind was swirling 5-10 mph mostly toward the shooter from 12 oclock or around there.

 

Hunting Bullets and Target Bullets… Is There a Middle Ground?

The difference between a hunting bullet and a target bullet, in the strictest sense, is that a target bullet is required only to place a hole in paper with exacting micrometer like accuracy.

On the other hand a hunting bullet needs to strike the vital zone of your game animal such as a deer, elk or bear within the vital heart lung area usually 6 to 8 inches in diameter, then expand as it travels though vital tissue to create a wound channel through the animal and preferably exit to leave a blood trail. Is there a middle ground where both target and hunting bullets meet? The answer is a resounding YES!

I believe what has changed is the use of ballistic science coupled with new manufacturing and test equipment with tolerances that are so much better than that of the 1960’s and 1970’s and its impact on bullet manufacture cost and overall quality.

In many cases today hunting bullets have the same exacting quality as some of today’s target bullets and the cost associated with each are not orders of magnitude different. So you can use hunting bullets, in many cases, for target competition because the bullet ballistic’s on the outside are the same, such as Nosler with their “Ballistic tip” and Nosler AccuBond and e-Tip and the new Hornady ELD-X (Extremely Low Drag eXpanding) Hunting bullet and their line of other hunting bullets that equally can be used for Match grade target Competition. Of course there are other companies doing great things but these are good examples.

It was Hornady just recently that used science to validate long range ballistics using Doppler Radar (Yes the same technology used by police to detect your car speed) and determined that the bullet meplat (tip) of polycarbonate was melting and needed to be reformulated to be heat resistant.

In general American bullet manufacturing is moving in that direction as a science. And it is we the shooters and hunters that benefit. The movement of today’s manufacturing also reduces cost for total cartridge manufacture making shooting less expensive and more attractive to shooting and hunting enthusiasts. And they are made in America!!!

Good Shooting!

© 2016

 

 

 

Savage Model 12 LRP 6.5 Creedmoor System Test Products Arriving updated 5/24

My heart quickens at the thought of testing each new rifle, scope and accessories here at New Hampshire Rifleman… Like Christmas in the summer.  As you are aware if you read articles here at New Hampshire Rifleman, we are going to test the Savage Model 12 Long Range Precision Rifle in 6.5 Creedmoor. I am told that this Rifle can really shoot and sports a 26 inch barrel/w 1-8 twist. It just arrived to my FFL. I drove over just minutes ago and filled out the background check as usual and the rifle is home in my office  Wow! We shall see. I used my Lyman Electronic Trigger pull gauge and the Target model accuTrigger weighed in at an  average of 2 lbs pull out of the box. The red target trigger is adjustable  as low as 6 oz and as high as 2.5 pounds.

DSC_0005

I ran a Hornady bullet OAL gauge in the bore to find lands at 2.868 inches w/ my Sierra bullets.

Max SAAMI COL is 2.825 but need one caliber worth of grip to hold bullet which will be closer to 2.80 inches for a safer COL for this bullet.

 

 

 

along with a “New” 2016 Leupold VX-3i/w aggressively redesigned power selector. Shipping to NH Rifleman soon…

a 20 MOA Picatinny rail add-on to reach out there and the famous RX 1200i DNA Laser rangefinder with TBR.

And the test bed Match grade 142 grain bullets from Sierra – The Bulletsmiths®

6.5 mm/.264 Caliber (.264) 142 gr. HPBT MatchKing (100 bullets)

and

Cartridges with the new Hornady® ELD-X™ Hunting bullets see earlier article. The Sierra bullets and cartridges have arrived but no rifle yet but it is on its way to my FFL dealer here in Plaistow, NH.

I will hand load the Sierra’s, one at a time… details to come.