About Ed Hale

I am an avid hunter with rifle and Bow and have been hunting for more than 50 years. I have taken big game such as whitetail deer, red deer, elk, Moose and African Plains game such as Kudu, Gemsbok, Springbok, Blesbok, and Impala and wrote an ebook entitled African Safari -Rifle and Bow and Arrow on how to prepare for a first safari. Ed is a serious cartridge reloader and ballistics student. He has earned two degrees in science and has written hundreds of outdoor article on hunting with both bow and rifle.

Too Many Tree Stands – Deer at Midnight

I remember a nearby patch of woods never looked so good with pre-season deer sign.  So did lots of other bowhunters. In fact it seemed that they were competing for the same darn tree. Of course deer are stupid y’know. They don’t look up and never mind the lingering smell of humans shuffling through the autumn leaves. Of course they look up! We taught them that! Of course you are there opening morning to shoot a big’un and may be you saw a deer or two. In fact maybe a deer or two were harvested but no big bucks. I admit to being among those folks before. After the deer find out that hunting season has begun they shift to new territory in daylight and come back only at night. Yep, you made them nocturnal…

It is better to hunt where the deer aren’t readily apparent so to speak so as not to tip off the other bowhunters competing for the same space. Look for out of the way funnels and thickets and the nasty stuff and you will see more uspooked deer. Have you ever seen a deer walk as if on glass? I have. The deer knows you are there and is trying to locate you and seems nervous and jumpy. These are deer that will jump the string so to speak as the arrow sails over its back.

So be aware too many bowhunters in a really small area will surely educate the deer. And you will never find a big buck there…except at midnight. Yes the lessons we learn…

Good Hunting!

 

Family Trip To Newfoundland-Cod Fish Abound

Come ere till I tells ya, eh, say some of those salty folk. Newfoundlander’s are inventive and resilient and on the ball 24 seven. Some of you perhaps think that Newfoundland being so far north that they are behind the times. In fact, Newfoundland is far ahead of the world of electronics and power grids, and Infrastructure, and even housing. The highways are cared for like no other as it is how Newfoundland gets its food and goods from town to town perhaps 50 to 150 kilometers apart. In addition they love to travel abroad and to the USA for a change of weather and scenery. The cost of living in Newfoundland is higher, I believe than in the states in general.  But the locals fish and hunt and garden to add to the larder at a lower cost. Especially cod fishing…

On the cod fishery, it was decades ago that Newfoundland found its cod fish rapidly disappearing, due in large part to over-fishing. Cod numbers plunged! The Canadian Government literally shut down cod fishing for years to allow for recovery. Science based research and action was extremely painful for every household as cod was a staple food source. But Newfoundlander’s are resilient and so are the cod fish!

Today cod fish in Newfoundland abound. My wife Susan and I and I travel each year to a family owned cottage along Bonavista Bay. We flew out of Boston on Air Canada and all was terrific. We only stayed a week. Too short for sure. We landed in St. John’s and as always we stop at the nearby Quidi Vidi Brewery there in Quidi Vidi Village and buy our Iceberg Beer made with water from 20,000 year old Iceberg’s that float out at sea.

On the family property this year, we dedicated time to scrape and paint along with our vacation. The weather can do a number to rot exposed wood. Newfoundland is a paint rich environment!

Below a view from the porch. 

It is a steep walk down to the beach in front of the house as wife Sue demonstrates.

Over the past 3 years we have been to the cottage and cod fished on legal weekends. We are allowed 5 fish per person per day or 15 fish per boat. In all three years we fished less than an hour and caught our limit each time in three separate locations. Having a fish finder and depth finder were key to locating the fish, often in very large schools. The rule is you keep what you catch until you get to your limit or less. This week my wife Susan and I again fished with ardent Newfoundlander’s Mike and Angie Hogarth and son Michael on their wooden boat in Trinity, Newfoundland.

I believe the Hogarth’s depend on cod for as a major yearly food source.  Mike is a hunter as well, and hunts Moose with the 30-06 Springfield, a great Moose Rifle!

Mike, like myself,  is a real outdoor kind of guy.

Back to cod, The Hogarth’s use the tried and true method of salting the cod and then freezing it as well. Angie’s favorite recipe is to make fish cakes using cod and potato. Mike gave us a few bags of salt cod to try. Young Mike was eager to catch a big one, perhaps 10 pounds with a hand line.

Cod jigging is the best way to catch them, but be aware that in a school of Newfoundland cod, an upward jig is likely to snag a fish as to have one bite the hook. I know from first hand experience. When I let my jig hit bottom it was bumping into fish on its last few feet to hit the bottom. My line would go slack as the jig made its way through the school of fish. I learned to raise the jig slowly and hope that a cod would bite the hook instead.

On this trip we left the dock found our fishing spot and caught our boat limit all in a span of 45 minutes.

The scenery here at Trinity is breathtaking!

Young Mike and his dad both caught bigger fish than I did, and matter of fact, I was thrilled just to be fishing with them.

Angie was right there to cheer son Michael on as we all were. Michael is a fine young man at the age of 12. Mike and I filleted the fish and young Mike took out the cod tongues. Cod tongues are tender and a delicacy to all Newfoundlander’s. We fry them up in a fry pan dipped in flour or a batter. Wow!

Off to fillet the fish!!

I brought my fillet knife along to help. I am not as fast as Mike but I have filleted my own fish for decades and do it well. Got to have a sharp knife!

We freeze the fish and bring it home in a cardboard boxed cooler. I thing maybe 20 lbs of fish and a pint of backyard blueberries Sue picked. We bring some Iceberg beer back as well but be sure to meet all customs requirements.

Mike and family are hockey fans and hope to make it to Boston to see a Bruins Game this fall. Who knows, maybe we can have the Hogarth’s visit us here in New Hampshire as we are just 40 miles from Boston.

Cheers!

© Copyright Article and Images All Rights Reserved.

 

 

 

My Roots Of Bowhunting and Rifles

A bowhunting acquaintance once said of my fondness of archery, you’ve been around archery since dirt.

Ever since Robin Hood came out as a TV show in the late 1950 and early 1960’s I had found my hero, to fight for truth and justice and to live off the game and fish in the field and streams of Sherwood Forest. Millions of young boys like me took to the field and forest with makeshift longbows made of a maple or hickory sapling. There were  no video games back then. My mother who was a home maker said to my brother and I during the summer, lunch is at 12 and dinner is at 5 pm. Go play till then, and get out of the house.

Even back then I absorbed the honorable nature of Robin Hood played by Richard Greene to fight for rights of the people and the rule of law by a just leader and not the tyrant that Prince John portrayed on TV in the early 1960’s. 

I built my first long bow at the age of 6 from a maple sapling and string from the kitchen drawer. I used whatever I could get to shoot as an arrow, often it was a shaft of goldenrod. Later at 10 years old I bugged my mother to use her S&H Green Stamps to purchase my first recurve bow. I was on  my way to becoming a hunter back then. My father worked building nuclear submarines but in his spare time when he was not gardening, he had a long bow he would sometimes shoot in the back yard.

Enter the Rifle – My dad taught my brother and I to shoot a single shot 22 rifle and worked us up to a 30-30 and 38-55 Winchester for deer hunting. I killed my first deer, a doe, with the 38-55 Winchester and loved that lever action.

My love of hunting was equal to my love of shooting and hunting with both gun and bow, it is a life long passion I cherish. 

Back to the Bow – I shot instinctive for years thanks to Fred Bear, who I personally met at Kittery Trading Post in the 1960’s. I was good at it on targets. But then I tried the first compound bows and they gave me a huge edge in hunting, though I still had a nostalgic love of recurves and long bows.

Back in the 1970’s, my first new compound bow was a Herter’s Power Magnum.  Today it is a museum piece, one of the first production compound bows.  It had a set of timing cams that you could adjust with an Allen wrench. Timing cam’s? What the heck is that! The second bow was a Martin Cougar magnum 50% let off. I ran the 3D archery program at a local club for many years with great satisfaction.  I have endeavored to study bow-building long bows and recurves for a time and made a  dozen Self Bows of hickory and maple but it did not hold my interest as a life long endeavor as I still loved to hunt first and foremost.

The third compound bow was a High Country Sniper I won in a raffle w/65% let off which I took to Africa with great success. I competed with it at 3D archery and at indoor league where I won my share of trophies. I was pleased to often be top shot in my archery league.

My fourth bow is a Hoyt X-Tec (a 10 year old bow) which I shot at 70 lbs for quite some time. Of late I have a pinched neck nerve but am trying to get my bow arm back in shape for some whitetail action using much less poundage.

Good Hunting!

 

© 2018

 

Chronic Wasting Disease – Mapping the Disease

Chronic Wasting Disease has been found in several states and 2 provinces. It slowly kills deer, moose, and elk. When contracted, it is fatal in all cases says Center of Disease Control. https://www.cdc.gov/prions/cwd/cwd-animals.html

CWD is caused by a protein called a “prion” the deer “cervid” manufactures. When manufactured incorrectly by the deer, the protein, then will eventually kill it. The deer will become sick and die. Humans thus far have not been affected for consuming CWD game meat but if meat tests positive from a “CWD Management Zone”, meat should be buried in a land fill.

It is passed on to other deer “cervids” by making contact with saliva,urine, and feces. The higher the density of deer the faster it can travel. The most susceptible are whitetails due to the large numbers in some areas, especially deer farms and ranches who raise deer to hunt, for harvest for food,  or to create better genetics.

In the case of captive deer farms, they have been at the center of the CWD issue because it is found there often first and then it is passed to surrounding wild populations.

The map below makes my point. It was updated in July of 2018.

Where there are yellow dots, these were captive deer facilities where, when CWD was discovered, all the deer were euthanized to prevent the spread.

A red dot means it was recently found but the deer have not been euthanized at this time.

Grey and dark grey areas are wild populations surrounding the captive deer that have contracted the disease and the areas are designated as CWD Management Zones

Some of these captive deer farms raised deer to be relocated to areas that perhaps had poor deer genetics thus unknowingly possibly spreading the disease to wild populations.

The hard part is that there is no test at this time for live deer according to officials. The deer’s head, brain and tissue are tested in a lab for the errant “prion”. Once found, the land area of concern is identified and managed as a CWD Management Area at both the National and State level.

Early mapping techniques highlighted and indicted the whole state thus making much of the center of the USA all black and obscuring and masking the real focal points of the disease.

In New York you can see the yellow former captive deer facility and the surrounding wild population which was (i believe) secondarily infected now termed CWD Management Zones. The same can be seen in Texas at a captive deer facility and the secondary wild deer infection CWD Management Zone.  In Saskatchewan and Alberta there were dozens of captive deer, breeding, farming and ranching facilities that had to be euthanized. That is a lot of dead deer and the surrounding secondary infection which resulted.

https://www.nwhc.usgs.gov/disease_information/chronic_wasting_disease/

USGS map of North America showing counties with CWD.

Concentrating high density populations of wildlife is risky as it allows disease to move rapidly though them. Wildlife that feed in a concentrated area like a feeder are more susceptible to spread of disease that those wild animals who forage separately. In the case of CWD at farms, deer are fed supplements at feeders allowing the CWD to spread via saliva and move deep into large numbers of deer. Euthanizing was the only solution.

In grey areas were CWD Management Zones exist, all deer harvested are recommended to be tested for CWD prior to consuming the meat.

Accordingly, states must test road killed deer or deer the state has euthanized to test to ensure that the disease has not spread.

In Summary, my investigations have revealed excellent teamwork at the state and national level to define and isolate CWD. I am encouraged that CWD Management areas are on the road to recovery and that management lessons have been learned.

New Laws and rules should be forthcoming.

What this tells me as a hunter is that wildlife agencies are on top of this and that we should look forward to the deer hunt and eat some of the finest venison on the planet!

Good Hunting!

Deer Management in New Hampshire

The New Hampshire Fish and Game department has over the years created a very helpful website. Below is a very well written summary of how New Hampshire manages its whitetail deer population by NH Deer Biologist Dan Bergeron. The chart is also found in this article. As you can see since 1982 to 2016, the total deer harvest has tripled state wide from around three thousand to nearly ten thousand.

https://wildlife.state.nh.us/hunting/deer-mgt.html

In addition to this deer harvest information there is a mountain of data found in the 2017 Wildlife Harvest Summary.

https://wildlife.state.nh.us/hunting/documents/2017-harvest-summary.pdf 

From a hunter perspective here in Southern NH, Posted Land is a fact of life. Some hunters can gain written landowner permission to hunt in these posted areas. Do your research! It may pay off!

Other hunters seek out New Hampshire’s Wildlife Management Areas (WMA) where hunting on state owned land is encouraged. See maps below

https://wildlife.state.nh.us/maps/wma.html

Way up north near Errol and further to Pittsburg, NH there are miles of open land provided by lumber companies and miles of dirt roads to get you far off the beaten path if you desire. Deer densities are lower but there are fields, deep coniferous woods and waters are simply wild. A marvelous opportunity to get away from it all.

What is so terrific about the NH Fish and Game website is that it is comprehensive provides a rich resource for information on New Hampshire Wildlife, Licensing,  the Department itself etc. A great source of educational information.

For those of you who spend time with the Harvest Survey, there is enough information by town to see where you may want to set foot this fall to deer hunt. New is good!

NH Antler and Trophy Club host a yearly gathering of Trophy Deer. See this facebook page for big bucks of New Hampshire.

Good Researching and Good Hunting!

 

 

 

 

Smith & Wesson: M&P Shield® M2.0™ with Integrated Crimson Trace® Laser

FOR IMMEDIATE RELEASE

 

Contact:
Matt Spafford, Smith & Wesson Corp.

1-844-772-5159

media@smith-wesson.com

 

M&P Shield® M2.0 with Integrated Crimson Trace® Laser

Now Available in .45 Auto

New Models Available with Red or Green Integrated Crimson Trace Laser

 

 

SPRINGFIELD, Mass., (July 30, 2018) – Smith & Wesson Corp. today announced that it has expanded its M&P Shield M2.0 pistol series with the addition of the new M&P®45 Shield™ M2.0 pistol with integrated Crimson Trace® red and green laser, chambered in .45 Auto.  An ideal choice for those looking for a concealed carry firearm in a larger caliber, the new M&P45 Shield M2.0 pistol builds off of the proven M&P Shield M2.0 pistol series, providing confidence and reliable performance, day or night, in a slim, lightweight, and easy-to-carry profile.

 

The M&P45 Shield M2.0 pistol with integrated Crimson Trace red and green laser delivers all of the familiar M&P Shield pistol operating features, including a slim profile and 18-degree grip angle for a natural point of aim.  The M&P45 Shield M2.0 with integrated laser features two laser modes and ambidextrous laser activation.  The pistol is designed with a compact 3.3” barrel and the enhanced M2.0 feature set, including a light, crisp trigger and the M2.0 aggressive grip texture for enhanced control.  The M&P45 Shield M2.0 pistol ships with two magazines: one seven round extended grip magazine, and one six round flush magazine.

 

The M&P45 Shield M2.0 pistol with integrated Crimson Trace red laser has an MSRP of $499, while the configuration with integrated Crimson Trace green laser has an MSRP of $549.

 

For more information about the M&P Shield M2.0 family of pistols, including spec sheets and images, please click here.

 

To stay up-to-date on the latest news from M&P, be sure to follow Smith & Wesson Corp. on Facebook, Twitter, Instagram and YouTube.

 

About Smith & Wesson 

Smith & Wesson Corp. is a provider of quality firearms for personal protection, target shooting and hunting in the global consumer and professional markets. Smith & Wesson is world famous for its handguns and long guns sold under the Smith & Wesson®, Performance Center®, M&P®, Thompson/Center Arms, and Gemtech® brands.  Through its Manufacturing Services Division, Smith & Wesson Corp. also provides forging, machining, and precision plastic injection molding services to a wide variety of consumer goods companies. For more information on Smith & Wesson, call (800) 331-0852 or log on to www.smith-wesson.com.

 

Timney Trigger for the Weatherby Vanguard?

Truth is, the average hunter could have lived with the original trigger. However, I am not an average hunter, the quality engineer in me wanted better. Reduce variation, Cpk. That said: I tried to adjust the original trigger. I noticed at the range that when I expected the trigger to break, it wasn’t, and had to apply slightly more pressure to the trigger. I took the rifle apart per the Manual to adjust the set screw to a lighter poundage. I could not. The spring in the trigger was at its lowest setting and could get just around 3 lbs. 10 oz. out of the Weatherby Trigger, that was it. Not bad, but ceteris paribus (all other things being equal) I wanted 3 pounds like my other rifles.

As a potential long range hunter who goes on hunts that can cost thousands of dollars and has high marksmanship standards, it made sense to upgrade the trigger. The Timney is adjustable down below 3 lbs too for target and also smoother and crisper than the factory trigger.

Some research with my friends at Timney finds a Timney Drop-in – Weatherby Vanguard Trigger pre-set at the factory to 3 pounds. Wow! Nice!

Easy-Peasy! In a few swift motions following disassembly procedures in the Owners Manual, I removed the stock mounting screws and removed and replaced the trigger as a drop-in and screwed a single screw in the trigger base to mount it. Then replaced stock and trigger plate and screwed the mounting screws back by torquing the rear trigger screw to its 35 ft-lb setting first, then did the same for the forward mount screw to the same torque.

Photo below is the removal of the stock and trigger housing. When reinstalled, remember to torque to 35 ft-lbs first ( I use a Wheeler Fat Wrench to set the torque)

Photo below of the forward mounting screw. Set to 35 ft-lbs after the rear screw has been torqued near the trigger.

The Vanguard Trigger is held in place by a single screw. Below image is the original trigger.  This trigger has nearly 1/4 inch uptake movement to touch the sear. The Timney has no uptake and is right on the sear at the get-go.

Photo below is the new Timney Trigger installed and pre-set at 3 pounds pull.

 

Done! Total time was about 20 minutes. My Digital Lyman Pull Gage indicates that the Timney trigger brakes at 3 pounds or so and amazingly crisp. At a cost of $129 dollars, I think the Timney upgrade is worth it for those long range shot and increased accuracy. Further, that any shot at a moving target as in a walking deer, you want to know exactly when your finger pressure on the trigger will fire the rifle. Cheers to Accuracy!

Good Hunting!

©2018 All Rights Reserved.

 

 

Weatherby Vanguard 6.5 Creedmoor/Leupold VX-6 – 600 yards with 129 grain Nosler ABLR Hunting Bullet

Thanks to Weatherby, Leupold and Nosler, this shooting test is comprehensive as it marries the Weatherby Vanguard Weatherguard to a Leupold VX-6 3-18 44mm Gold Ring Scope and Nosler AccuBond bullets for deer hunting. Lets see how the marriage unfolds…

My friends at Nosler were out of stock for testing 129 grain AccuBond Long Range hunting bullets (very popular), but I found some on-line to test the Weatherby Vanguard Weatherguard with. This bullet has a G1 ballistic coefficient of 0.561 and exits the barrel around 2680 fps from a cold barrel. I hand-loaded the cartridge with 39 grains of RL 15 powder, a max load I had already proved-in at 1 MOA at 100 yards.  According to the Nosler reloading guide, RL 15 at 39 grains was the most accurate. My chronograph measured the first 3 shot spread was 10 fps  with an average velocity of 2680 fps. Later shots from a warmed barrel showed an increase in velocity and spread. Hunters don’t shoot with a warmed barrel. It is a cold shot that counts in the field, accordingly I was not overly concerned with the warmed barrel velocity variation.

Now to test that premise and data, I shot those first 4 rounds at 600 yards in prone position at Nashua NH Fish and Game 600 yard range. The shots had about a 6 inch spread left to right and had a vertical spread of around an inch. Very nice indeed! The wind was not a significant factor as it was a calm day. The bullet dropped 14 minutes from my 100 yard zero. Accordingly, I turned the Leupold VX-6 Turret up 14 minutes and I was on paper.

I had to adjust left and down to hit the bullseye. I am now sighted in for 600 yards, though I will limit my hunting shots to 400 yards or less. With the Leupold sight picture I was comfortable at 12x though my prone position felt very low to the ground. The value driven Weatherby Vanguard, with it high cheek rest and Monte-Carlo design aided greatly with my scope alignment height. I just can’t believe you can get this rifle new for under $600 bucks. The Leupold VX-6 however retails for nearly double what the rifle costs but it delivers the best clarity in low light at long range that I have ever experienced at this price point and with one twist go from 3x to 18x. Crazy good!

In a hunting situation I will be hopefully using shooting sticks, perhaps standing or kneeling. The delivered Kinetic Energy from the 24 inch Weatherby barrel at 400 yards is 1250 ft-lbs thereby providing excellent energy for penetration on a mature whitetail deer. The Nosler AccuBond was designed to mushroom with the lead bonded to the copper jacket, thus the bullet remains largely intact as it penetrates.  See the table from www.jbmballistics.com below. I could have shown more data at longer ranges but this works for a hunting situation I might expect.

Calculated Table
Range Drop Drop Windage Windage Velocity Mach Energy Time Lead Lead
(yd) (in) (MOA) (in) (MOA) (ft/s) (none) (ft•lbs) (s) (in) (MOA)
0 -1.5 *** 0.0 *** 2680.0 2.342 2057.0 0.000 0.0 ***
25 -0.6 -2.5 0.0 0.1 2640.7 2.308 1997.1 0.028 5.0 19.0
50 -0.1 -0.2 0.1 0.3 2601.7 2.274 1938.6 0.057 10.0 19.1
75 0.1 0.1 0.3 0.4 2563.1 2.240 1881.4 0.086 15.1 19.2
100 -0.0 -0.0 0.6 0.6 2524.8 2.207 1825.6 0.115 20.3 19.4
125 -0.5 -0.3 0.9 0.7 2486.8 2.173 1771.1 0.145 25.6 19.5
150 -1.3 -0.8 1.4 0.9 2449.1 2.141 1717.8 0.176 30.9 19.7
175 -2.4 -1.3 1.9 1.0 2411.8 2.108 1665.8 0.207 36.3 19.8
200 -4.0 -1.9 2.5 1.2 2374.8 2.076 1615.1 0.238 41.9 20.0
225 -5.9 -2.5 3.1 1.3 2338.0 2.043 1565.5 0.270 47.5 20.1
250 -8.2 -3.1 3.9 1.5 2301.6 2.012 1517.2 0.302 53.2 20.3
275 -10.9 -3.8 4.8 1.7 2265.5 1.980 1470.0 0.335 58.9 20.5
300 -14.1 -4.5 5.7 1.8 2229.8 1.949 1423.9 0.368 64.8 20.6
325 -17.7 -5.2 6.7 2.0 2194.3 1.918 1379.0 0.402 70.8 20.8
350 -21.7 -5.9 7.9 2.2 2159.2 1.887 1335.1 0.437 76.8 21.0
375 -26.2 -6.7 9.1 2.3 2124.3 1.857 1292.4 0.472 83.0 21.1
400 -31.2 -7.5 10.5 2.5 2089.8 1.827 1250.8 0.507 89.3 21.3

This marriage is bliss! It is one excellent deer hunting rig, a Weatherby Vanguard Weatherguard topped with a Leupold Gold Ring VX-6 in the recoil friendly 6.5 Creedmoor with Nosler AccuBond Bullets. This combination is perhaps much better from an accuracy standpoint than I will achieve in field  hunting conditions.

I retested the rounds at 100 yards after the 600 yard shoot and set the Leupold back to zero. The rifle shot a 3/4 inch 3 shot group with a cold barrel. Very pleased with that!!

It is up to you the hunter to set your limits within your capabilities. We owe that to the game we hunt!

Good Hunting!!

© 2018 All Rights Reserved.

 

New Hampshire Rifleman Worldwide Readership

For those companies who send products for us to test, we say; Thank You!!

We are delighted to share our often stellar test results in hopes of increasing sales and educate our readers on the pros and cons of the products we test. We are very happy with test results on Leupold products, Ruger Rifles, Savage Rifles, TC Rifles, Weatherby Rifles and for Nosler and Hornady bullets. And pleased with testing of the Sig Sauer P320 just recently.

New Hampshire Rifleman Magazine is growing yearly with a worldwide readership nearing 60,000 views. The hottest readership month for us is November with over 8000 views and focuses on hunting and cartridge/caliber selection.

The most popular of my articles is the “The 270 Winchester vs the 6.5 Creedmoor”.  Our readers can’t get enough of it!

The largest portion of our readership is right here in the USA, second is Canada, third is South Africa and New Zealand. We have readers in UK, Poland, Czech Republic and South America (Argentina) as well as other nations. 

Here is to a second half of 2018 that is even better than last year!

Cheers!

Ed Hale – Editor-in-Chief

 

 

Weatherby Vanguard – Why a Picatinny Rail? – Updated

I like my Weatherby Vanguard Weatherguard Rifle very much. It is not flashy, it is nearly waterproof and rust proof. The stock is synthetic and can take a beating in any weather. It is a serious hunters rifle. It has one of the best bolt actions in the industry. It is chambered in 6.5 Creedmoor, one of the finest target or hunting rounds in the world today. For under $600 dollars! Wow!

See my other Weatherby articles on this site.

One of the things that I will be improving however is the mounting of my scope. Many of us today depend on a Picatinny Rail for scope mounting. In my testing of this rifle, I discovered that you can purchase a Picatinny rail and solve some otherwise scope mounting issues. My favorite scope, a Leupold VX-6 scope needed to come rearward for the use of its high power without scope shadowing, however traditional rings, shown above, limited the rearward movement because of the scope bell shape. I solved this by purchasing a Picatinny rail from Tally Manufacturing, specifically designed for the Weatherby Vanguard. Mine includes a 20 MOA ramp for long range. See Photo added below with my favorite scope, a Leupold VX-6 3-18 x 44mm. Now the scope is far enough back for me to see with 18x with a full picture. Caution should be taken if you are shooting a heavy recoiling rifle as the rear of the scope can make a nice crescent cut in your forehead. Many of us learned that lesson the hard way!

http://www.talleymanufacturing.com/Products/Tactical/Picatinny-Rails/Weatherby/Picatinny-Base-for-Weatherby-Vanguard-(Short-A-(1).aspx

Good Shooting!

© 2018